Making Construction Easier

How To Resurface Your Concrete Garage Floor

If your concrete garage floor is starting to look worn and cracked, it may be time to resurface it. While this can seem like a difficult job, it is something you are able to do yourself with the right supplies and techniques. Here are some tips for resurfacing your concrete garage floor.

Prepare the Floor

As with most DIY jobs, the first step is the preparation step. Before you start resurfacing the concrete floor, it needs to be repaired and cleaned. You should not try resurfacing a concrete floor that has cracks or pieces missing, so that is a good place to start. Check every inch of the floor and use a concrete filler for any cracks or holes you see. If there are big chunks of concrete missing, you will need to replace them first. You may want to seek help from a professional if this is the case. However, small cracks are easy to fill yourself.

Once the minor repairs are done, it is time to clean the concrete floor. Make sure the filler products you used have dried and cured completely before cleaning. Start by sweeping the concrete floor to remove any dust, dirt, and loose debris. Next, use a power washer to rinse it well. If you don't have a power washer, you can use a garden hose with a high-pressure nozzle. If there are stains, use dish soap and warm water to remove them, along with a stiff brush for scrubbing.

Mix the Resurfacing Material

When you resurface a concrete floor, you use material that is not surprisingly called "resurfacer." This is a type of material that is made from acrylic and other additives that helps to provide a smooth surface across your concrete floor. You shouldn't need to do much filling for your concrete floors since you already completed that step, which means you are simply improving the overall appearance and strength of the floors.

To do that, you first need to mix the material. Even if you are using more than one bag, just mix one at a time. A paddle mixer and drill will help you mix it best. Read the directions on the bag so you are mixing it with the right amount of water. If working in a cold climate, use warm water, or cold water when working in a warm climate. Continue mixing it in a bucket until you have a smooth consistency that you can pour.

Apply the Resurfacer

Now that the material is mixed thoroughly, it is time to apply it. Make sure the concrete floor is moistened first, as it helps it to stick better. However, you don't want any puddles on the floor. To apply the resurfacer, pour a small amount of it on one section of the concrete floor, then use a long-handled squeegee to spread it out around that area. Spread it out until you have a thin, even layer, then repeat the process for the next section.

Once the entire garage floor has been covered with the resurfacer, leave it alone and let it dry. It needs to cure and harden, which can take a few days, though you should be able to walk on it after several hours. If you need help with resurfacing your concrete, visit Mara Restoration, Inc.


Share